o1806 ms im / 40500tn (kt) / 1300ta / 7087ki / 4235mw / 6032ki, id no.999-1/5 la6393d la6393s overview the la6393d and 6393s are high-perform ance dual comparators that are capable of operating from a single power supply voltage over a wide range of 2 to 36v. because of their excellent input characteristics and low power, they can be very conveniently applied to multisignal parallel co mparator circuits that require high-density assembly. features ? la6393d: dip-8 pin package, la6393s: sip-9 pin package. ? wide operating power-supply voltage range (single power supply: 2.0 to 36.0v, dual power supplies: 1.0 to 18.0v). ? wide common-mode input voltage range (0 to v cc -1.5v). ? open-collector output enabling wired or. ? small current drain (0.6ma) and low power. specifications absolute maximum ratings at ta = 25 c parameter symbol conditions ratings unit maximum supply voltage v cc max 36 v differential input voltage v id 36 v common-mode input voltage range v icm -0.3 to +36 v allowable power dissipation pd max 570 mw operating temperature topr -30 to +85 c storage temperature tstg -55 to +125 c ordering number : en999d monolithic linear ic high-performance dual comparator any and all sanyo semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo semiconductor representative nearest you before usingany sanyo semiconductor products described or contained herein in such applications. sanyo semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated val ues (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor products described or contained herein.
la6393d / la6393s no.999-2/5 operating characteristics at ta = 25 c, v cc = 5v ratings parameter symbol conditions test circuit min typ max unit input offset voltage v io 1 1 5 mv input offset current i io 2 5 50 na input bias current i b 3 25 250 na common-mode input voltage range v icm 0 v cc -1.5 v supply current i cc r l = 4 0.6 1 ma voltage gain vg r l = 15k ? 5 200 v/mv response time v rl = 5v, r l = 5.1k ? 6 1.3 s output sink current i sink v in - = 1v, v in + = 0v, v o 1.5v 7 6 16 ma output saturation current v ol v in - = 1v, v in + = 0v, i sink 3ma 8 0.2 0.4 v output leakage current i leak v in - = 0v, v in + = 1v, v o = 5v 9 0.1 na package dimensions unit: mm (typ) 3001d [la6393d] package dimensions unit: mm (typ) 3017d [la6393s] sanyo : dip8(300mil) 9.14 14 85 1.4 1.0 6.4 7.62 0.25 (3.0) 3.9max 0.51min 3.2 (0.76) 2.54 0.5 sanyo : sip9 (0.84) 0.25 1.35 3.0 22.0 0.51 min 5.7 max 3.2 2.54 1.3 0.5 1 9 (4.5)
la6393d / la6393s no.999-3/5 test circuits 1. input offset voltage 2. input offset current 3. input bias current 4. supply current 5. voltage gain 6. response time 7. output sink current 8. output saturation voltage 9. output leakage current v id = v f 1+r2/r1 v cc v cc r2 r1 r1 r2 1.4v v ee v f 1 c null i id = v f 2 - v f 1 r(1+r2/r1) v cc v cc r2 r1 r1 r2 1.4v v ee v f 2 c null r r r l v cc v cc r2 r1 r1 r2 1.4v v ee v f 4 c null r r l v cc v cc r2 r1 r1 r2 e k 1, e k 2 v f 5,6 c null r l r l i b = | v f 3 - v f 4 | 2r(1+r2/r1) v cc v cc r2 r1 r1 r2 1.4v v ee v f 3 c null r r l a v cc a v cc la6393d la6393s ila07103 ila07104 ila07106 ila07107 ila07105 v ee vg= (e k 1 - e k 2) (1+r2/r1) v f 6 - v f 5 v cc r l 100mv 0 v cc v in v o a v cc v in v ol v cc v in v o a v i sink ? v(over-drive) t r v out v in 0 90% ila07109 ila07111 ila07110 ila07108 ? v: overdrive
la6393d / la6393s no.999-4/5 equivalent circuit pin assignment v cc v out 100 a 100 a tr8 tr7 tr4 tr6 tr5 tr2 tr3 tr1 v in + v in - ila07112 la6393d la6393s ila07113 v out 2 v out 1 v in -1 v in +1 v in +2 v in -2 gnd v cc v cc 1 9 8 7 6 5 4 3 2 1 2 3 4 8 7 6 5 v out 2 v out 1 v in -1 v in +1 v in -2 v in +2 gnd v cc 0.4 0.8 1.2 1.6 2.0 2.4 0 04812162024283236 i cc - v cc supply current, i cc - ma ila01102 t a = - 2 0 c r l = ambient temperature, ta- c i b - ta input bias current, i b - na ila01103 100 10 20 30 40 50 60 70 80 90 0 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 ambient temperature, ta- c v ol - ta output saturation voltage, v ol - v ila01104 0.08 0.16 0.24 0.28 0.04 0.12 0.20 0 v cc =+5v i sink =3ma output sink current, i sink - ma v ol - i sink output saturation voltage, v ol - v ila07115 2 5 3 2 7 0.01 5 3 2 7 0.1 5 3 2 7 1.0 0.001 0.01 23 57 0.1 23 57 1.0 23 57 10 2 t a = + 8 5 c - 2 0 c + 2 5 c supply voltage, v cc - ma + 8 5 c + 2 5 c
la6393d / la6393s no.999-5/5 sample application circuits ps this catalog provides information as of october, 2006. specifications and information herein are subject to change without notice. specifications of any and all sanyo semiconductor pr oducts described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify s ymptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo semiconductor co., ltd. strives to supply high- quality high-reliability products. however, any and all semiconductor products fail with some probabi lity. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property . when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo semiconductor produc ts (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording , or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo semiconductor co., ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor product that you intend to use. information (including circuit diagrams and circui t parameters) herein is for example only; it is not guaranteed for volume production. sanyo semicondu ctor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. v cc 3k ? ila07114 10k ? 10k ? v out v ref v in v cc 15k ? 51k ? 1m ? v out 51k ? 51k ? 1000pf voltage comparator (with hysteresis) square wave generator time, t - s v o , v in - t input voltage, v in - mv output voltage, v o - v input voltage, v in - mv output voltag, v o - v ila01106 6 -100 -150 -50 0 0 1 2 3 4 5 0 -1.0 -0.5 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 - + +5v 5.1k ? v o v in 5 0 m v 8 0 m v 2 0 m v o v e r d r i v e 5 m v time, t - s v o , v in - t ila01107 6 0 50 -50 100 0 1 2 3 4 5 0 -1.0 -0.5 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 - + +5v 5.1k ? v o v in 5 0 m v 8 0 m v 2 0 m v o v e r d r i v e 5 m v
|
